The warmth of endless hot water can enhance family happiness and ECOTOUCH has that figured out. Being one of those limited choices with smart self modulation heating, ECOTOUCH on demand tankless water heater provides instant & endless hot water with optimal thermal efficiency of 98% and minimum energy cost, at the same time saving space, time, money. Thus, the electric tankless hot water heater heats up 1.2GPM water from 67℉ to 109℉, which out runs most point use water heaters and will sure cut your electric bill. ECOTOUCH products are technologically advanced, designed with compact & Sleek size, it is one of perfect solutions for Kitchen & Bathroom Sinks, Wet Bars, Strip Malls, Doctor's Office.

 

MULTIPLE SAFETY PROTECTIONS

 

• Over temperature protection
• Dry heating protection
• Leakage protection
• Water and electricity line separated

KINDLY NOTE

1.The unit is mainly for sinks, not for shower purpose.

2.The tankless water heater should be installed professionally.

3.Please read instruction manual carefully prior to installation and use!

SPECIFICATIONS

• Power: 5.5kW
• Voltage: 240V~60Hz
• Min. water flow to activate the unit: 0.475GMP
• Max tempt rise from 67°F to 109°F @ 1.2GPM
• Max. Amperage: 23A
• Recommended wire size: 10AWG
• Required circuit breaker : 1x 2-Pole 30 AMP

 

EASY INSTALLATION

Real compact design, water heater coordinates with scenes decor, above sink or under sink water heater, horizontally, vertically or obliquely installation. Comes with easy installation brackets, pipe fitting of 1/2" NPT and 10AWG power cord(fixed to the unit) so you don't to have to hire a plumber even if you can do it.

Point-of-Use Electric Tankless Water Heaters For Sinks

Instant hot water and endless As soon as you turn it on, hot water comes out immediately with desired temperature and sufficient flow rate of 1-1.5 gallon per minute, no waiting for preheat or standby energy loss. The best part is you get endless hot water now, 24h service, anytime you need. Perfect for sinks.	Smart modulation and energy saving Equipped with a smart modulating control for stable temp, the hot water heater adjusts exact power input according to power calculation based on flow rate and temp setting in real time, which means you get still stable temp, instead of scalding hot, when you reduce flow rate. Optimal energy efficiency is promised.	Sleek & compact design, simple operation Wall-mounted & compact design, the tankless water heater electric is perfect for easy installation at any space. It features a sleek and attractive design, black body, to blend seamlessly with decor. Setting the temperature through the touch at the bottom of the screen buttons. Clear information from the unit screen helps you get fully understanding of the heating process, making unit operation simple and convenient.

 

Only 3 steps to determine whether the instant water heater can meet your requirements

 

Step 1: Figuring out your average inlet water temperature, this determines if you can get hot water of desired temp from the hot water heater. Outlet water temp equals inlet water temp plus temp raise(by the hot water heater).

Step 2: Check the chart to figure out the flow rate suggested for your area and the corresponding outlet water temp to see if it meets your need. For example, if inlet water in your area is 67℉, you are able to get 1.2 GPM hot water @ 109℉, if you set temp lower, you are able to get more than 1.2GPM, correspondingly.

Step 3: Determining specs and electrical infrastructure is important because without the correct infrastructure your unit may not fit onto your breaker panel. we would like to remind you of reading the user manual prior installation and using for the first time.

 

 

 

​​​​​​