SPECIFICATIONS

External Testing Certification: ce

Hardware Version: 2024

Certification: RoHS

Certification: FCC

Certification: CE

Special Features: Bluetooth

Software Version: NEW

Model Name: THINKSCAN 689BT

Item Type: Engine Analyzer

Electronic: Yes

Material Type: abs metal

 

 

📌NEWEST THINKSCAN 689BT Auto Diagnostic scanner tool

>> Support CANFD / DOIP protocol
>> More powerful configuration: 8’inch touch screen + Android 10.0 operating system4GB RAM + 64GB ROM Large storage with a 4150mAh high endurance battery
>> OE-Level Full system diagnose
>> ECU Coding + Active Test (Bi-Direction Control)
>> 34 Reset Service + 28 Language English, German, Spanish, French, Italian, Portuguese, Japanese, Russian, Polish, Turkish, Dutch, Hungarian, Chinese Traditional, Korean, Greek, Slovak, Romanian, Arabic, Croatian, Slovenian, Finnish, Czech, Swedish, Danish, Persian, Serbian, Vietnamese, Bulgarian
>> Exetend to work with FCA account (optional)

 

Full System Diagnostic Lifetime free

As an OE level automotive diagnostic tool, can access most car ECUs to read, clear codes, retrieve live data, freeze frame, ECU information and perform active tests, matching, adaptation, turn off warning lights, reset monitors. Full range car models and full car system diagnose make it a professional automotive diagnostic tool.

Include : ABS System, Engine System, SAS System , TPMS System , IMMO System , Battery System ,Oil Service System , SRS System ,DPF System ，Air Conditioning System，Transmission System, etc...

 

Full OBD FUNCTION Lifetime free

>>Read Codes: Knows what and where the problem is according to the DTC and its definition.
>>Clear Codes: Clear/Erases the DTCs and turns off the warning lights after code reading and certain repairs.
>>Live Data: Show the information of continuous data stream from vehicle in live graphic display.
>>Smog Check: You can check if the various emission-related parts or systems on the vehicle are operating properly and make sure the monitors are ready for a smog test.
>>Freeze Frame: Request freeze frame information.
>>O2 Sensor Test: Show the last results of O2 sensor test in graphic display for troubleshooting.
>>Evap Test: Fuel Tank System (Carbon canister test), special control mode requests control of EVAP test.
>>On-board Monitor Test: Read the results of on-board diagnostic monitoring tests for specific components/systems.
>>DTC Code: Built-in DTC lookup library with cause analysis
>>Vehicle Information: Display the information such as VIN (Vehicle identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.

 

34 Reset Function Lifetime free update

*Not all vehicles support all reset functions. Please send vehicle model and year to customer service for inquiry.

1.Oil Reset
If the oil maintenance light is on, the car needs to be maintained. After the maintenance, the driving time and other data should be reset to zero, so that the maintenance light will be turned off, and the car system will enable a new maintenance cycle.

2.Brake Reset
1. When the brake is used to a certain thickness, the brake sensor line will be worn, and the brake pad sensor line will send a signal to the car computer to prompt the replacement of the brake pad. After replacing the brake pads, the brake needs to be reset, otherwise the car will still alarm.

2. Need to do the reset situation:
a. replace the brake pad and brake pad wear induction line;
b. brake pad indicator light on;
c. brake pad sensor line short-circuit repair;
d. After replacing the servomotor

3.BMS battery reset
For a vehicle with the battery management function, if the battery status is detected as faulty (aging or damaged), the fault code will saved in the ECU. After replacing the battery and running "BMS Reset", it can delete the fault code and re-match, based on the relevant information of the existing battery as the standard, let the monitoring unit monitor. Avoid false positives from instrument error messages

4.DPF(Diesel Particulate Filter) Regeneration
Diesel Particulate Filter in the working process, particles will accumulate in the filter, when it reaches a certain value, it will lead to engine power and economic performance decline, must be removed in time to ensure that DPF continues to work normally.

5.SAS Steering Angel Reset
After the vehicle is disassembled or replaced with parts related to the steering function, the steering Angle learning function needs to be performed.

6.TPMS Tire Pressure Reset
only applicable to vehicles without a tire pressure sensors.

if the tire pressure is too low or air leaking, replacing or installing tire pressure monitoring equipment, replacing tires, tire pressure sensor damage, and cars with tire pressure monitoring function in the case of tire transposition etc,.Tire pressure reset is required after vehicle maintenance and turn off the tire pressure fault indicator light.

7.IMMO Key matching
When replacing the ignition switch key, ignition switch, combined instrument panel, engine control unit (ECU), body control module (BCM) and remote control battery, IMMO key matching is required.

8.ABS Bleeding
In the case of replacement of ABS system, ABS pump, brake pump, brake line and brake fluid, it is necessary to bleeding the ABS system through the ABS bleeding function.

9.Sunroof Reset
The sunroof needs to be reset when the sunroof control unit have communication problem or changed.

10.Suspension Reset
When the body height sensor or control module in the air suspension system is replaced, or the car level is wrong, the vehicle needs to perform this function to adjust the body height sensor for level calibration

11.Gearbox (Transmission )Reset
When the transmission parts wear and aging become serious, the adaptive learning of the control unit does not work, and the parts need to be repaired and replaced, then the automatic transmission control unit needs to be forced to learn.

12.AFS Headlamp Reset
This function can initialize the adaptive headlight system. The adaptive headlight system can decide whether to automatically turn on the headlights according to the ambient light intensity, and monitor the vehicle's driving speed, body attitude, etc., and timely adjust the lighting Angle of the headlights. When replacing a new headlight, headlight automatic motor, or there is a fault code that is not set by the headlight, it is necessary to perform headlight matching features.

13.Injector Coding
After replacing the ECU or injector, each cylinder injector needs to be coded to confirm or recode. So that the cylinder can better identify each cylinder injector, accurate control of fuel injection.

14.ETS Learning(throttle matching)
Need to perform throttle matching: Replace the electronic control unit, power off the electronic control unit, replace the electronic throttle assembly, replace or disassemble the intake port, clean the throttle.

15.Gear Learning
Gear learning is required when replacing the engine ECU, crankshaft position sensor, crankshaft flywheel, and fault code that the gear has not learned,it is necessary to gear learning.

16.EGR Self-Learning
If the EGR fails, the engine/EPC fault indicator light of the vehicle instrument will light up, and the EGR self-learning function can turn off the fault indicator light after cleaning or replacing the EGR valve.

17.A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.

18.Adblue Reset(Diesel Engine Exhaust Gas Filter)
After the diesel exhaust treatment fluid (car adblue) is replaced or filled up, Turn off the adblue fault indicator light by adblue reset.

19.Airbag Reset
this function is only available for some models, please consult the seller

This function resets the airbag data to clear the airbag collision fault indicator.

20.Coolant Bleeding
Use this function to activate the electronic water pump before bleeding the coolant system. Electronic water pumping systems are commonly found in BMW models.

21.Tyre modification
Tire size parameter setting after tire modification or replacement.

22.Language Change
This function is used to change the system language of the vehicle central control panel.

23.Nox Sensor Reset
Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust. lf the Nox fault is re-initialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine ECU.

24.odometer read
This function is only used to read the actual mileage and does not support mileage modification or zeroing.

25.Stop/Start Reset
This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware).

26.Seat Calibration
This function is applied to match the seats with memory function that are replaced and repaired.

27.Transport Mode
ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc.At this time, the transport mode needs to be deactivated to restore the vehicle to normal.

28.Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window.

29.ECU Reset
After performing the ECU coding, some ECUs may not display the new code and will need to run this function to display the correct code.

30.Clutch Matching
This function is used to learn the engagement point of the clutch at which the engine torque is transmitted to the gearbox. To be carried out after replacing the control unit, replacing/removing the gearbox or replacing the clutch.

31.Rainfall Light Sensor
The rain sensor is used to adjust the wiping frequency and the light sensor adjusts the light intensity of the automatic headlights depending on the ambient light and darkness.After replacing the windscreen or the sensor, the rain/driving light sensor must be initialised. With this service function,initialisation performs an adjustment of the rain/driving light sensor.

32.FRM Matching
This function resets the FRM control unit (installed in BMW and MINI vehicles). The reset clears fixed faults in the footwell module related to a short circult of the lights.

33.Turbocharging Matching
For learning after replacement of turbocharger system components or resetting the turbocharger learning value.

34.Gateway Module Data Calibration
After replacing the gateway control unit, there may be a VIN inconsistency, so the VIN needs to be changed.

 

Support ECU Coding :

The Coding function is used to re-flash the vehicle control modules.It is used to reprogram adaptive data for vehicle control modules after repairs or replacements of vehicle parts;Provide solutions for the issues of Drivability,Fuel Efficiency,Power Loss,Fault Codes,Durability of Mechanical Parts etc.;Brake the limitations and restrictions;make full use of the car hidden features,like change the chimes on car,set how many times the one-touch signal flickers for one touch,remember settings for Start/Stop systems,and more.

 

Support Active Test(BI-Directional Control) :

If the actuator is normal,without using the vehicle's controls,to get a significant boost in effectiveness:

[Turn on the radiator fan|Modulate the throttle|Open/close windows|Operate mirrors|Turn on/off the lights|Turn on/off the sound horn|Test door lock …]

 

Support CANFD protocol

it is the only product in this price range that is compatible with CAN-FD protocol and supports the latest For GM vehicles manufactured after 2020. Adopts advanced CRC algorithms to accommodate more data from 8 to 64 bytes in the CAN frame, which runs faster than other products and reduces the risk of undetected errors to greatly enhance the user experience.

GM: CANFD models

[2021][Chevrolet][Onix] CANFD6&14
[2021][Chevrolet][Tracker] CANFD6&14
[2021][Chevrolet][Suburban] CCMA
[2021][Cadillac][Escalade ESV] CCMA
[2021][Cadillac][Escalade] CCMA
[2021[GMC][YUKON XL] CCMA
[2021[GMC][YUKON] CCMA
[2023][Chevrolet][Montana] CANFD6&14
[2024][Buick][Electra E5] VSIM
[2024][GMC][Sierra] H/U TCM 10 Speed (MGM)/10 Speed (MGU)
[2021][Chevrolet][Onix] All systems
[2021][Chevrolet][Tracker] All systems
[2021][Chevrolet][Suburban] CCMA
[2021][Cadillac][Escalade ESV] CCMA
[2021][Cadillac][Escalade] CCMA
[2021[GMC][YUKON XL] CCMA
[2021[GMC][YUKON] CCMA
[2023][Chevrolet][Montana] All systems
[2024][Buick][Electra E5] VSIM
[2024][GMC][Sierra] H/U TCM 10 Speed (MGM)/10 Speed (MGU)

Support DoIP

With Diagnostics over DoIP, Diagnostics introduced over UDS are used over TCP/IP and Ethernet. This enables much higher data rates than with CAN. That makes THINKSCAN 689 save both in terms of time and expenses in the case of complex diagnostic tasks and flash applications.

Support FCA

Visit THINKCAR official site Register you shop & techsFull access to FCA SGW
THINKCARThinkScan 689BT
Compatile with 2018-2024 chrysler/Dodge Ram/F,iat/Alfa Romeo/Je.ep
(Exetend to work with FCA account (optional)

 

COVER 99% MODELS WORLDWIDE

For Amercian
for Buick, for Chrysler, for Cadillac, for Chevrolet, for Doge, for AU Ford, for Brazil Fiat, for Brazil GM, for Ford, for GM, for Jeep, for Lincoln, for SGM

For European
for Aston Martin, for Audi, for Alfa Remeo, for Abarth, for BMW, for Bentley, for Bugatti, for Citroen, for DR, for Dacia, for EU Ford, for Ferrari, for Fiat, for GAZ, for Iveco, for IZH, for Jaguar, for Land Rover, for Lamborghini, for Lancia, for Mercedes, for Maserati, for Maybach, for Mini, for Opel, for Opel (south africa), for PAZ, for Peugeot, for Porche, for Renault, for Rover, for Rolls-royce, for SAAB, for Seat, for Skoda, for Smart, for Sprinter, for UAZ, for VAZ, for Volvo, for Volkswagen, for Vauxhall, for ZAZ

For Asian
Acura, for Daewoo, for Daihatsu, for AU Holden, for Honda, for Hyundai, for Ikco, for Isuzu, for Infiniti, for Kia, for Luxgen, for Lexus, for Mahindra (India), for Maruti (India), for Tata (India), for Mahindra, for Maruti, for Mazda, for Mitsubishi, for MVM, for Nissan, for Nissangtr, for Perodua (Malaysia), for Proton (Malaysia), for Perodua, for Proton, for Renault Samsung, for Saipa, for Ssangyong, for Subaru, for Suzuki, for Toyota, for Tlisuzu, for United Pakistan

 

4 IN 1 Scientific Data Management:

1.Live Data Stream Graph&Record Data&Diagnosis Record Playback&Print Report

2.The professional vehicle scanner tool can scientific graph data,record data,play back data,freeze frame,and print reports.

3.In the real-time diagnosis process,important diagnosis information can be instantly stored in the memory,including reading of fault codes and frozen frames and real-time data streams.

4.After real-time diagnosis is completed,Diagnosis function record playback,the diagnosis information and process previously saved in the memory can be replayed to facilitate the analysis of various data information.

5.One-click generation of a diagnosis report after diagnosis will help users quickly solve problems,avoid blind maintenance, and save money/time.