SPECIFICATIONS

Hardware Version: NEW

Software Version: NEW

Item Type: Code Readers & Scan Tools

Language: English

Language: Spanish

Software Update: Yes

 

 

Why You Need MUCAR CDE900 ?

 

1.Lifetime Free Full OBD2 Functions

2.Extra Fee:$39.95 for 4 systems diagnose (Engine,Brake,Airbag,Transmission) lifetime free, no annual fee$79.95 for all 28 reset service lifetime free, no annual fee

3. Large Memory: 32 ROM Support TF Card:≤256G

4.One-click Auto VIN technology, automatically identify the brand, model and year; quickly match the car diagnostic software.

5. Automatically generate diagnostic reports; share via email. DTC lookup library.

6. Android 6.0 system; logically laid out interface; 4-inch touchable LCD, 720P clear and easy to read;

 

Choose 4 system software ( Free for lifetime after purchase, no renewal )

---If you place an order and subsequently plan to purchase 4 systems, you can do so by searching for CDE900 Software on the platform.

 

💥Engine System Diagnosis

 

By Reading, Clearing DTCs and viewing Live Data Stream, the scan tool can help you easily pinpoint the cause of the Engine System problem and turn off the warning light related, thus ensuring the engine works properly, and enhancing its performance.

 

💥ABS System Diagnosis

 

By accessing to ABS system to view its Live Data Stream, and retrieving the fault codes, this scanner can troubleshoot the ABS issue with a visual inspection of all brake components that caused the warning light, and turn the light off.

 

💥SRS System Diagnosis

 

By detecting every electronic parameters in SRS system to check their health status, this diagnostic tool can address the SRS potential issues timely to ensure your driving safety, and turn off the warning light of Airbag.

 

💥Transmission system diagnosis

 

By checking the Transmission system, this tool can figure the problem out via reading codes, or check the health status via Live Data viewing, and turn off the warning light, making sure that the right amount of power goes to the wheels to drive at a given speed.

 

All Cars Lifetime Free 10 Mode OBDII/EOBD Functions

 

Supported models: compatible with all models supporting OBD II protocol after 1996

supporting agreement:ISO 14230-4(KWP2000)/IOS 15765-4(CAN)/ISO 9141-2(IOS)/ISO14229(UDS)/SAEJ 1850(VPW&PWM)"

Mode 1:Read live data stream

Mode 2:Read freeze frame data

Mode 3:Read DTCs(diagnostic trouble codes)

Mode 4:Clear dtcs

Mode 5:Oxygen sensor monitoring

Mode 6:System monitoring

Mode 7:Read pending DTCs

Mode 8:Control operation of on-board system

Mode 9:Read vehicle information

Mode 10:Request emissions-related diagnostic trouble codes with permanent status after a clear/reset emission-related diagnostic information.

 

Note: If you can't find your model in the model list, please manually select the 'Generic' model. ( Please select the correct model, if you select the wrong model an error will occur.

 

🎇28 reset ($15.95 for 1 reset functions lifetime free, $79.95 for 28 reset functions lifetime free)

If you place an order and subsequently plan to purchase 28 resets, you can do so by searching for CDE900 Software on the platform.

 

1.Oil Lamp Reset Service

Allows you to perform reset for a new calculation of Engine Oil Life system once changed the oil.

 

2.EPB Electronic Park Brake Reset

It is important in the maintenance of electronic braking system's safety and efficiency.

 

3.BAT battery service

Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

 

4.DPF Diesel Particulate Filter Reset

Specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.

 

5.SAS Steering Angel Sensor Reset

Helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

 

6.TPMS Tire Pressure Monitoring System Reset

Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

 

7.IMMO Key Programming

The unique car key programming and read pin code function, it is mainly used to disable the lost vehicle keys and program a new replacement key fob.

 

8.ABS Bleeding

ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.

 

9.Sunroof Reset

The sunroof needs to be reset when the sunroof control unit have communication problem or changed.

 

10.Suspension Reset

Try reset electronic suspension air ride with the massage system close all doors koeo flip through messages system go to suspension reset or on off.

 

11.Gearbox (Transmission )Reset

Procedure Reset Transmission Adaptive Learning DIY. Start the car and drive. Once you perform this procedure the Engine Control Unit (ECU) and Transmission Control Unit (TCU) will work together to learn how you drive by monitoring your driving pattern. After you follow this programming method of the TCU / ECU drive the car.

 

12.AFS Headlamp Reset

'AFS' means Adaptive Front lighting System (at night with the Bi-Xenon headlights) it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.

 

13.Injector Coding

Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off.

 

14.Throttle Adaptation

The throttle body is a tube containing a pivoting flat valve (butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car, a throttle position sensor and air flow sensor communicate with the computer, which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair.

 

15.Gear Learning

The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.

 

16.EGR Reset

Reduce nitrogen oxides (NOx) in the exhaust gas and improve fuel economy at partial load.

 

17.A/F Reset

This function is applied to set or learn Air/Fuel ratio parameters.

 

18.Adblue Reset(Diesel Engine Exhaust Gas Filter)

After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required.

 

19.Airbag Reset

This function resets the airbag data to clear the airbag collision fault indicator.

 

20.Coolant Bleeding

Use this function to activate the electronic water pump before venting the cooling system.

 

21.AT Learning

This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift

 

22.Language Change

This function is used to change the system language of the vehicle central control panel.

 

23.Nox Sensor Reset

Nox sensor is a sensor used to detect the content of nitrogen oxides (Nox) in engine exhaust. lf the Nox fault is re-initialized and the Nox catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine Ecu.

 

24.ODO Reset

a) ODO reset is to copy,write, or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable, so that the odometer shows the actual mileage.

b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it

is necessary to do ODO reset after maintenance.

 

25.Stop/Start Reset

This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and supported by hardware)

26.Seat Calibration

This function is applied to match the seats with memory function that are replaced and repaired.

 

27.Transport Mode

ln order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc.At this time, the transport mode needs to be deactivated to restore the vehicle to normal.

 

28.Windows Calibration

This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of power window.

 

 

Quick Auto VIN Identification

 

AUTO VIN technology can identify vehicle make, model, and year information to shorten the vehicle navigation process. Feel free to enter the VIN data manually.

 

4 in 1 Live Data Stream Analyse in Graph

 

The MUCAR CDE900 shows you live sensors data and provides data graphing for intuitive diagnostics and monitoring your vehicle performance, help customers to better analyze the abnormal parameter.

 

DTC Lookup

 

Every code in THINKOBD comes with a description to aid technicians in efficient vehicle diagnostics and repair.This will save you the trouble of having to go online to look for the meaning of a diagnostic trouble code. And you can also simply click on the error code selected so as to get an in-depth definition.

 

Share Report via Wi-Fi

Rather than taking the additional hassle, with this scanner, you would easily be able to share the diagnostics report to your clients or technicians via Wi-Fi.

 

Abarth, Acura, Alfa Romeo, Astion Martin, Audi, Baic Senova,Baic Weiwang, Baic, Bentley, Brilliance, Bugatti, Buick, Cadillac, Chery, Chevrolet, Chrysler, Chsuzuki, Citroen, Dacia, Daewoo, Daihatsu, Dodge,

 

Euro Ford, Ferrari, Fiat, Ford, Gaz, GM, Gonow, GWM, Hafei,Haima,

 

Honda, Hyundai, IKCO, Infiniti, ISUZU, IVECO, IZH, JAC, Jaguar, Jeep, Jinlong, JMC, Joylong,

 

Kia, Lamborghini, Lancia, Land Rover, Lexus, Lincoln, Luxgen, Lynkco, Mahindra, Maserati, Maxus, Mazda, , Mitsubishi,Mvm, Nissan, Nissan GTR, Opel, Paz, Perodua, Peugeot, Polarsun, Porsche, Proton, ,

 

Renault Samsung, Renault, Rover, SAAB, Saipa, Seat, Seaz, SGM, Skoda, Smart, Spark, Sprinter, Subaru, Suzuki, Tata, Toyota, UAZ, Vauxhall, VAZ, Venucia, Volkswagen, Volvo, VW_CV, YQMazda, ZAZ,

 

 

 

How to Upgrade CDE900 systems

1. Connect to Wifi (Slide down the home page)

2. Click on "Setting"

3. Enter "Upgrade"

4. Select APP (upgrade to the latest version)